Swiss RUAG to produce payload suspensions for Saab Gripen E/F

Swiss company RUAG Aerostructures has received the final approval for the airworthiness test for the first payload suspension (pylon) for Saab Gripen E/F aircraft.

RUAG to produce payload suspensions for Saab Gripen E/F
Pylons will be installed on the Gripen E/F aircraft for Swedish and Brazilian Air Force. Credit: RUAG Group.

Swiss company RUAG Aerostructures has received the final approval for the airworthiness test for the first payload suspension (pylon) for Saab Gripen E/F aircraft.

This follows six years of development and industrialisation along with the production of many prototypes.

With this development, RUAG will commence serial production for more than 500 pylons, which will be installed on aircraft for the Swedish and Brazilian Air Force.

In 2015, RUAG received an Sfr80m ($77.6m) contract from Saab to supply the series production of payload mountings for the Gripen E/F fighter aircraft.

RUAG Aerostructures executive vice-president Dirk Prehn said: “With the successful acceptance of the first serially manufactured pylon, we have reached an important milestone.

“It also marked a long and successful partnership between two leading companies in the aerospace sector.”

Payload suspensions are designed to carry extra fuel tanks, reconnaissance systems or guided missiles.

They are complex technical elements that contain electronic and mechanical systems and need to adhere to the highest aerodynamics and load capacity requirements.

Gripen E/F can be connected to up to ten racks, which includes eight that will be manufactured by RUAG.

Production of a majority of individual parts for four pylon types will be carried out at Emmen in Switzerland, which includes surface treatment and crack testing.

The units will be put through final assembly and functional testing, following which the assemblies will be handed over to the customer in Sweden.

Saab will manufacture Pylon 1 that is fitted at the end of each of the aircraft’s wings.

Saab Business Area Aeronautics Airframe Development head Hans Häggrot added: “Over the last six years we have worked very successfully with RUAG Aerostructures on the development and manufacture of the pylons.

“The payload pylons on Gripen E/F are a key component of the new aircraft’s broad operational capability.”

© 2020, GDC. © GDC and www.globaldefensecorp.com. Unauthorized use and/or duplication of this material without express and written permission from this site’s author and/or owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to www.globaldefensecorp.com with appropriate and specific direction to the original content.

Be the first to comment

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.